
The Revolution Hybrid

Free
4 day Burn in. More info click
here
2m
stereo set (8m total)
with 2 to 2 van den Hul banana/spade terminations
£340.00 free
P&P
3m stereo set (8m total)
with 2 to 2 van den Hul spade terminations
£420.00 free P&P
Extra
per 1m stereo pair @ £120.00
The
general construction is the same as with The REVELATION HYBRID:
First an inner group with 308 x 0.14 mm. very high grade Matched
Crystal (MC) OFC strands with a dense coating of very pure silver.
The inner group exhibits a total metal cross-section area of 4.74
mm².
Covering this core is a Linear Structured Carbon ® (LSC) saturated
layer which bridges minor defects and captures and transforms
the radiated magnetic field of the inner conductor to an audio
signal again.
The helically wound outer conductor structure employs the same
silver coated MC OFC metal quality as found in the core and consists
of 16 separate conductors, each with 19 strands of 0.11 mm. This
produces a metal cross-section area of 2.89 mm². These 16
outer conductors are individually insulated and are standardly
wired in parallel with the centre conductor, giving a single lead
cable. Their being individually insulated however also allows
them to be wired together as a separate signal return. (Versions
wired as such and fit with matching connectors are available either
as twin-lead speaker cable or as single-ended interconnect on
special customer demand).
The total metal cross-section area of The REVOLUTION HYBRID is
7.63 mm² giving the cable its very low resistance of 0.226
Ohm/100 m.
The outer jacket is made of red HULLIFLEX ® 3, a mechanically
superb insulation material.
The
REVOLUTION HYBRID can also be used as a fantastic single-ended
interconnect in combination with our C - 11.3 RCA type connector.
Sonic
report: The REVOLUTION HYBRID renders a very spacious and detailed
structure without any specific accent on high frequencies.