This
very attractive dark-red coloured mat finished twin-lead speaker
cable is designed to produce the best transfer quality at an affordable
price.
Each lead consists of 483 x 0.15 mm. high purity Matched Crystal
(MC) OFC strands with a dense and very pure silver coating.
The resistance per lead is just: 0.21 Ohm/100 meter.
The metal cross-section area for each conductor is: 8.54 mm²,
equalling AWG 8.
The capacitance between the 2 leads is a nice and low 27 pF/meter.
Covering the 2 conductors you will find an extra Linear Structured
Carbon ® saturated layer.
This layer dramatically improves the sonic qualities of The MAGNUM
HYBRID.
The cable jacket is made of our HULLIFLEX ® 5, a very flexible
and mechanically superb insulation material.
The plus and minus leads are different in jacket shape with gold
coloured printing in the flat middle-section. Both properties
are easy polarity finders.
Type printing at 25 cm. (10") distance makes cutting of specified
lengths very easy.
Packing
conditions: 50 meters per reel in a 310 x 310 x 290 mm. box with
a total shipping weight of 14.7 kg.
Cable Type: Twin conductor
Conductor Material: HYBRID: High purity dense Silver coated high
purity Matched Crystal OFC + Linear Structured Carbon ® saturated
layer(s)
Design Purpose/
Application Area(s): Loudspeaker cable
Eff. Conductor Ø/Eq. AWG No./Strands: 2x(8.54 mm²
/ ~AWG 8 / 483)
External Diameter /
-Dimensions: 27.0 mm. wide; 7.5 mm. thick
Resistance 20 °C / 68 °F: 0.21 Ohm/100 m.
Capacitance: 27 pF/m.
Insulation / Dielectric Strength / Test Voltage: HULLIFLEX ®
5 / 300 Vrms min.
Connector Types Suitable: Our 6.5 mm. Ø cable entrance
diameter Bus type Universal Speaker Connectors or our 8.3 mm.
Ø cable entrance diameter BERRI Bus Connectors; Custom
mountable on ordered lengths.
Standard Sales Units / -Lengths: 50 m. reels; With connectors
mounted to specifications: any length; Without connectors: please
consult your van den Hul dealer or the van den Hul distributor
in your country.
Jacket Colours Available: Dark-red
Remarks: Self mounting of connectors is not advised since special
soldering equipment is required; Our custom connector mounting
service is available.
