High End Cable
www.highendcable.co.uk
For best prices telephone Dave Jackson on 01775 761880




The Third
Revelation
Revolution hybrid
The Wind
Super Nova
Inspiration hybrid
Magnum
Teatrack
CS 122hybrid
Cs 122hybrid Jumpers



MC Gold
Orchid
First Ultimate
First Metal
The Second
Integration hybrid
The Waterfall
D102 Mk III
Name
MC Scart

Headshell links


The Thames
Isis



HDMI Repeater


BS Mainstream
Mainserver



AES -EBU Professional
Optocoupler


Cable Tower



Acoustic ART
Acoustic Systems
Analysis Plus
Argento Audio
Artisan Silver Cables
Audience
Chord Company
Ecosse
Furutech
Nordost Corporation
MIT Industries
Quantum QRT
Revelation Audio Labs

StereoLab
Synergistic Research
Townshend Audio
van den Hul
Vovox
Wyrewizard

Power Conditioning
Audience adeptResponse
Isotek

Kemp Elektroniks
Quantum QRT
QBase
CableSpike
Cable Tower
Telos

Enhancement CDs

Room Treatment
Acoustic Art
Room Tuning Resonators

Ayra Speakers
Bel Canto
STAX headphones
Townshend Audio




XLR cables
Sub woofer cables

Chord ipod cables
iPod cables
DIN cables
Mains & Power cables
Jumpers
Firewire

Cables for dCS systems
Chord cables for Naim


HDMI
Digital cables
Optical cables
S video
Component cables


Moving Coil Cartridges
Lyra
- Ortofon - Sumiko


Subscribe today to

 

van den Hul - AES-EBU Professional Digital Cable - 110 ohm


1m with XLR terminations
£125.00
free P&P

AES-EBU 110 Ohm Professional (Halogen Free)

The AES-EBU committee has set the characteristic impedance for professional balanced digital signal transmission at 110 Ohm. World-wide this typical value is accepted as the standard impedance for professional balanced digital audio transfer. To meet this requirement, already since 1990 our company has been designing high quality balanced 110 Ohm interface cables. The ultimate result is our AES-EBU 110 Ohm Professional cable which provides a superior digital signal transmission quality.

The major design criteria with this cable have been:

To provide a stable and precise 110 Ohm transmission line impedance.
To provide a very high frequency bandwidth as well as minimal signal attenuation.
To provide a very high shielding factor against interference due to external electromagnetic fields.
The prevention of material deterioration brought about by external factors, like polluted air or mechanical causes.
Details:

The AES-EBU 110 Ohm Professional’s internal balanced construction contains two solid core centre conductors each consisting of a 0.75 mm solid core lead, made of high purity dense silver coated high purity matched crystal Oxygen Free Copper (OFC). Each lead exhibits a resistance of 4.0 Ohm/100 meter. The capacitance between both leads is very low: 47 pF/m. The two centre conductors’ respective red and transparent insulation is made of dense polyethylene, which together with their dense silver coating provides extra protection against external mechanical and corrosive aging factors.

To provide a stable and precise 110 Ohm transmission line impedance, the centre conductors’ combined dense polyethylene insulation and mild 60 mm lay maintains a solid balanced line geometry. In addition, specially treated fibres are used as internal fillers. These act to further stabilise the geometry and furthermore render the cable insensitive to humidity penetration and any resulting impedance deviations or transmission losses.
Note: To maintain a constant 110 Ohm impedance and avoid signal reflections, the advised minimum value of bending radius for the AES-EBU 110 Ohm Professional is 8.0 cm.

By maintaining a close tolerance 110 Ohm impedance, the AES-EBU 110 Ohm Professional keeps interface induced jitter to a minimum. Sonically this results into a much cleaner reproduced analog signal in direct comparison to other AES-EBU standardised products in the same transmission link.

Supporting accurate data transmission and low-jitter clock recovery, the AES-EBU 110 Ohm Professional furthermore features a very high frequency bandwidth. As an example: The -3 dB bandwidth of a 10 m. run well exceeds 300 MHz.

The AES-EBU 110 Ohm Professional’s cable screen consists of four layers: an aluminum tape beneath a braid of 120 high grade OFC wires with a dense pure silver coating, this beneath another aluminum tape and a Linear Structured Carbon ® (LSC) saturated outer layer. The resistance of the combined screens is 0.81 Ohm/100 meter.
This quadruple shielding provides supreme immunity against radio frequency and other electromagnetic interference, allowing trouble-free use of large lengths. Multiple lengths can be run in parallel without risk of mutual interference, even with other cabling (e.g. in cable conduits).

The AES-EBU 110 Ohm Professional’s 8.0 mm. external diameter dark red outer jacket is made of our PVC and Halogen Free HULLIFLEX ® 4; this new rugged insulation material combines excellent mechanical robustness with an optimal protection against chemical (corrosive) attack from the outside world and ensures a very long lifespan.
In addition, the use of gold-plated Neutrik special digital audio XLR connectors contributes to the good quality of this cable.

The AES-EBU 110 Ohm Professional has all the technology on board for exceptional performance without compromise and is especially suited for digital audio connections over greater distances (e.g. studio wiring).

Providing the cleanest possible signal transport in all AES-EBU digital audio applications, the AES-EBU 110 Ohm Professional is the ultimate choice for the professional and critical audiophile.

 

 
website hit counter
visit the website design guide
High End Cable