Cables for
dCS Scarlatti
dCS Paganini
dCS Classics

Stereovox XV2
for RCA, BNC and clocking links


Oehlbach 6 pin
IEEE 1394 Firewire

Nordost Silver Shadow

Air Absorb pack of 4

free website hit counters

 

Clocking & Firewire Setup and Dual AES option (where applicable)
dCS Systems

Get that little bit more from your dCS system firewire and clocking set up with a cable upgrade.
High End Cable have put together cable packs which add that little bit more.
Dave should know as he is a Classic dCS owner.

Click the images below for the cable packs to suit your system which offer improved clocking and interconnecting.

Scarlatti

Paganini

Classic dCS


Click her for a useful line diagram on the links required in a standard clocking and firewire setting

Click the images above for the cable packs to suit your system

The cables selected are from Stereovox, Nordost and Oehlbach. The Stereovox XV2. a true 75ohm cable which has a very wide bandwidth, is ideal for improved clocking and also gives astounding results when using it for the BNC or RCA links from CD to DAC. Its a cable that punches far above its weight. The Nordost Silver Shadow is an excellent cable link or the XLR connections and can be doubled up when using the Dual AES mode. The Oehlbach 6 pin 1394 Firewire interface seeks that little bit more when set for the DSD. Not only do these cables really perform they are flexible enough for tight installation and do not to put undue stress on the the dCS connections. If space behind your dCS equipment is not a factor then perhaps the ultimate clocking and Dual AES solutions would be the Nordost Valhalla digital.

Another useful accessory is the Oehlbach Air Absorb. This allows effective and protective spacing between components, stands and shelving. Supplied in packs of 4 they are only 16mm high with a diameter of 41.5mm. To buy scroll to bottom of the page.