Glastonbury III

TOWNSHEND AUDIO
Glastonbury Loudspeakers

Glastonbury V

Glastonbury III Speaker System

£16,000.00
free P&P UK. Outside please ask.
Please call Dave on 01775 761880

Designed as a no compromise full range loudspeaker system that adheres to the original concept of High Fidelity. The cabinet is very heavy and very rigid, whilst the sound radiating cones and ribbons are very low mass (extremely light) to give the most accurate sound. Great care has been taken in the driver selection and the crossover design to ensure seamless integration across the frequency range ensuring a virtually flat response with the lowest distortion. Townshend specially designed integrated stands mean the speakers are totally isolated from the floor from 5Hz upwards, to prevent speaker/floor resonance, transmission of sound to the floor and vibration from the floor to the speaker. It REALLY does work! All these benefits combine to produce speakers that play tunes in the bass like no other. They simply sound right, on any material!

Specification:
Frequency response - 23Hz-90kHz +/- 3dB
Loading - Bass Reflex tuned to 27Hz. Rear facing double flared fully aerodynamic port
Sealed Box (Midrange, Tweeter and Super tweeter).
Power Handling 150 - 400watts Recommended.
Impedance - 5 Ohm Min.
Finish - Mirror Stainless Steel.
Construction - Welded and riveted Stainless Steel shell,constrained layer bituminised/polymer damped, 20mm stone Herculite Plaster, Fibreglass reinforced.

Dimensions - 260x454x1150 (10x18x45")
Weight - 70kg (150lb) each.
Drivers - Bass 2x125mm ultra low-mass, long-throw aluminium cone DCT coil. Midrange 92mm ultra low-mass, aluminium cone moving coil. Tweeter Ribbon tweeter 10mm x 50mm. Super tweeter Townshend Audio Ribbon 5mm x 30mm. DCT copper.

Frequency normalisation - Active bass optimization filter for smooth response to 20 Hz for complete isolation from the environment.
Crossover - First order 500Hz, 4.5kHz, 20kHz
Inductors Air cored Enhanced™ Deep Cryogenic (DCT) Copper. Capacitors Selected non polarised precision electrolytic. Internal Wire Townshend Audio Isolda EDCT Impedance Matched. Suspension Double tensioned polymer. Resonance Vert 3Hz. Resonance Lat 1Hz.
Sound - Natural and clear.

 

The Glastonbury V Speaker System

£9,990.00
free P&P UK. Outside please ask.
Please call Dave on 01775 761880

This is a full range floor standing speaker on its own free floating vibration isolation stand. Four way bass reflex. Maximum Supertweeter, ribbon tweeter, wide range aluminium coned midrange and two wide range bass units

Specification:
Frequency response - 23Hz-90kHz +/- 3dB
Loading - Bass Reflex tuned to 27Hz.
Front facing double flared fully aerodynamic port
Sealed Box (Midrange, Tweeter and Super tweeter).
Power Handling - 150 - 400 W.
400 W Class D amplifiers Recommended.
Impedance - 5 Ohm Min.
Finish - Gloss black or gloss metallic grey. Mirror front trim
Construction - Welded and riveted steel shell, constrained layer bituminised/polymer damped, 16mm stone Herculite Plaster, Fibreglass reinforced.
Dimensions 23x30x94 (9x12x37")
Weight 40kg (88lb) each.
Drivers - Bass 2x125mm ultra low-mass, long-throw aluminium cone DCT coil. Midrange 92mm ultra low-mass, aluminium cone moving coil. Tweeter Ribbon tweeter 10mm x 50mm. Super tweeter Townshend Audio Ribbon 5mm x 30mm. DCT copper.

Crossover - First order 500Hz, 4.5kHz, 20kHz
Inductors Air cored Enhanced™ Deep Cryogenic (DCT) Copper. Capacitors Clarity Cap. Internal Wire Townshend Audio Isolda EDCT Impedance Matched.
Suspension Double tensioned polymer.
Resonance Vert 3Hz. Resonance Lat 1Hz.
Sound Natural and clear.

 

free website hit counters