SR 007 II Omega Reference System
The rationale in the development of the
new SR-007 Earspeaker was to provide deep powerful sound
previously unobtainable in Earspeakers. STAX engineers
developed a unique new electrode structure. Visible
through the outer case, gold plated on the outer edge
this new electrode has less holes than conventional
STAX Earspeakers and thus provides an increased diaphragm
vibration area allowing for rich and powerful sound
yet retaining all the delicacy STAX is famous for.
To maintain clear distortion-free sound it is most important
that nothing other than the diaphragm should vibrate.
Within the STAX SR-007 the sound element is encased
in a thick insulated resin case firmly fixed to the
rigid body. The results are nothing short of spectacular.
Utmost comfort for maximum enjoyment
of your STAX SR-007 is provided with earpads that are
fully adjustable to the shape of your head.
Prices
The SR-007 System II
The SR-007 Omega Ref. Electrostatic
earspeaker with SRM-007t II
direct coupled triode vacuum tube energiser
only £2,495.00
Free P&P
as
above but with DCT
EAT valves £2,795.00
Free P&P
The
SR-007 Omega headset only £1,595.00
Free P&P
Energiser available in black or gold. Headsets in black
only
The SR-727 II System
The SR-727 II Omega Ref. Electrostatic earspeaker
with SRM-717 direct
coupled FET. Pure Class A energiser
only £2,495.00
Free P&P
Energiser
available in black or gold. Headsets in black only
Specifications
of SR-007 (OMEGA II) Electrostatic Earspeakers
Type: Push-pull Configuration Electrostatic
Headphone
Frequency Response: 6---41,000Hz
Impedance: 170KOhms (10kHz)
Sound Pressure Sensitivity: 100dB/100Vr.m.s. Input/10kHz
Bias voltage: 580VDC
Left & Right Channel Identification: Left (L) and
Right (R) indicators are provided at the cable entrance
points on the Earspeakers.
The left channel cable is marked with a solid Line.
The right channel is marked with a dotted Line.
Ear Pads: Crafted from high quality natural leather
for durability and comfort.
Cable: Low capacitance wide format with 6 parallel PC-OCC
(Pure Crystal Ohno Continuous casting) conductors.
Weight: 365g without cable.
SRM 007t Specifications
Frequency
Response : DC~70KHz/+0, -1.5dB (100Vr.m.s. Output)
Gain : 60dB (Input 100mV Output 100V)
Harmonic Distortion : Less than 0.01% (1kHz, 100Vr.m.s.
Output)
Inputs: RCA×2, XLR1 (Balanced Input)
Maximum Output Voltage : 340Vr.m.s. (1kHz)
Earspeaker Output Bias Voltage : 230V×1, 580V×2)
AC Power Voltage : 120-240V (50~60Hz)
Voltage is adjusted for your area
Power Consumption : 55W
Operating Temperature Range 0~35 Degree
Dimensions : (W)195mm×(H)103mm×(D)420mm
Including Knob (20mm) & RCA jacks(10mm)
Weight : 4.7Kg
Vacuum tubes employed : 6FQ7/6CG7 4 PCS
SRM 717 Specifications
Frequency
Response DC - 100 kHz
(when a SR-007 or SR-404 is sconnected)
Maximum Output Voltage 450Vr.m.s. 20-10KHz
Total Harmonic Distortion Less than 0.01%, 100-10KHz/300Vr.m.s.
Amplification
60dB
Rated Input Level 100mV/100V output
Input Impedance 50 k Ohms
Bias Voltage 580V×2
Supply Voltage AC120-240V (±5%) 50/60Hz
Voltage is adjusted for your area
Power Consumption 45W
Operation Temperature 0-35 Degree
Dimension (W)195×(H)103×(D)420 mm
Weight 5 kgs
