 |
High End Cable |
Power
cables
|
|||||
 |
 |
||||||
Currency
Converter |
|||||||
 MINI SUB (Audio) Star earthed with 6 individually filtered outlets |
 |
||||||
Mini
Sub (Audio)
in silver £625.00 free P&P Mini Sub (Audio) In Black £625.00 free P&P Overview
At the rear of the unit you will note six high quality outlets, these are individually filtered to stop components ‘talking’ to each other or corrupting the clean supply provided by the unit. This is achieved by a series of delta filters on the outputs and a sophisticated filter circuit, which was inspired by work in cryogenics, and harnesses the technique used for the switching of cryogenic coils. Both products feature our new ‘Polaris-X’ technology that draws mains contaminants away from audio components plugged into the unit. Outputs
1 & 2 have been given a higher power rating and should be used
for high current devices, for example power amplifiers, integrated
amplifiers, some ‘tube’ pre-amplifiers, projectors and
plasma screens etc. The remaining four are suitable for all other
equipment, for example CD players, turntables etc… All fusing is external, this eliminates any need to enter the product. The unit is so safe that even if the mains are wired incorrectly in the rest of the house or environment that the product is used, the unit will correct the problem sonically. All components are of the highest grade and are under stressed, this gives greater longevity. These are hand soldered onto a PCB with silver solder, the large PCB also features a ground plane upper surface acting as a very high grade common mode filter across the whole board, this allows the unit to act as a true faraday cage, protecting itself from RFI and other components from the job it performs. Safety
Areas where ‘tube’ amplifiers are present should not exceed 25 degrees. If you are positioning the Mini Sub or Vision in the close proximity of such a device please be aware of this factor. If you have to locate the unit on the floor we strongly recommend you do not place the unit near heat sources, such as radiators or air ducts. Good air circulation is essential to prevent heat build up within the chassis. Do not place the Mini Sub or Vision on a soft surface, for example a rug or carpet, which could block the ventilation intakes on the underside of the unit. Do not let any liquids spill onto or objects fall into the chassis. Should either of these events happen immediately switch off the unit at the wall socket, wait for at least one minute, unplug all other cables and return it to your authorised IsoTek dealer for a full service. Placement
Equipment
coupling System
integration
Specifications
Number
of outlets: 6 |
|||||||
