| 
Furutech Audio Reference III
Series Interconnects
RCA & XLR
 
free
P&P
Type:
Hyper-Balanced Interconnects
Connectors: FP-106(R) RCA connector.
Features:
• Double-shielded a (Alpha)-OCC Conductors eliminate radiated
noise
• Formula GC-303 Antimagnetic EMI-Absorbent Modules surround
each cable
• High performance beautifully engineered rhodium plated RCA
[FP-106 (R)]
• Center filament pin [FP-106 (R)] a high-contact work of
engineering art composed of nonmagnetic rhodium-plated phosphor
bronze with Teflon dielectric
• RCA connector backbone composed of nonmagnetic rhodium-plated
eutectic cast brass with beautifully-finished nonmagnetic brass
outer locking shell.
• Shield 1 0.12 mm a (Alpha) conductor wire braid
• Shield 2 special EMI-absorbent Formula GC-303 Modules for
superior noise isolation
• Insulated with air-foamed HDPE reducing capacitance and
damping vibration
• Results in greater resolution, clarity, powerful dynamics,
and an ultra-quiet soundstage in which music develops more fully
without artificial upper-frequency “presence region”
glare.
• GC-303 allows a deeper, tighter bass to form a solid foundation
for the rest of the frequency range, better defining the original
recording’s venue. Natural, unforced detail reveals nuance
and energy for an engaging musical experience.
a
(Alpha) Conductor Is Composed Of Fine PCOCC Wire Strands
Treated With Furutech’s a (Alpha) Cryogenic and Demagnetizing
Process
Here’s What The Critics Say
“The Furutech cable sound is easily described as one that
completely avoids those peculiar striations that result from highlighting,
the providence of certain silver cables that emphasize edge definition
for nearly surreal image lock. Such sharp edging then becomes synonymous
with etching. It gives a short-lived appearance of exceptional detail
- short-lived since such sound is not only unrealistic but fatiguing.
“The
Furutech cables patently don't cause this. However, they are exceptionally
detailed. I can't help but think that the hexagonal barrel innards
[Formula GC-303 Modules] are at least somewhat responsible for this
wealth of clearly intelligible inner detail. Rather than throwing
detail at you, they throw out inter-note noise. While the end result
might seem the same -- more detail -- the way it communicates is
very different. Put plainly, the Furutechs never fatigue even at
elevated levels yet they do remain ultra resolved.”
-- Srajan Ebaen, 6moons.com
Specifications: Construction and Materials
• 30-strand a (Alpha)–OCC Conductor·0.18mm, 1.14mm
diameter
• Insulation: 30% air-foamed HDPE (Red/White) 2.60mm diameter
• Cable Lay: Two twisted cores with cotton yarn
• Cable Wrap: Non-woven fabric wrap ~5.8mm diameter
• Shield-1: 0.12mm braided a (Alpha) Conductor·Braid
density: 80% UP x 6.3mm diameter
• Sheath: Two layers flexible PVC (Dark Brown) 8.0mm diameter
• Shield-2: Special EMI- and noise-absorbent Formula GC-303
module
• Jacket: Nylon yarn braid. ~10.5mm diameter
Electrical Properties of Cable Test Method
Max. Conductor Resistance 26.4 O/km JISC3005 6 20?
Min. Insulation Resistance 1000 MO?km JISC3005 9.1 20?
Dielectric Strength AC. 500 V/1 min JISC3005 8
Electrostatic Capacitance Approx 42 PF/m at 1 KHz
Characteristic Impedance Approx 120 O at 100 MHz
|