| 
Furutech Audio Reference III - Digital Cables
 
Free
P&P
Complimentary
burn in
Digi
Reference III-N1 (RCA) / 1.2m
High End performance Digital Cable for Audio Equipment
All metallic parts are treated with the
*FURUTECH a(Alpha) Process (Super Cryogenic & Demagnetizing
Treatment)
(Type:
Hyper-Coaxial Interconnects )
Features:
• Double-shielded a (Alpha)-OCC Conductors eliminate radiated
noise
• Formula GC-303 Antimagnetic EMI-Absorbent Modules surround
each cable
• High performance beautifully engineered rhodium-plated connectors
[RCA FP-106 (R)] or BNC [FP-3-117 (R)] transfer signal without reflections
for extremely low jitter performance
• Center filament pin [FP-106 (R)] a high-contact work of
engineering art composed of nonmagnetic rhodium-plated phosphor
bronze with Teflon dielectric
• RCA connector backbone composed of nonmagnetic rhodium-plated
eutectic cast brass with beautifully-finished nonmagnetic brass
outer locking shell
• BNC connectors [FP-3-117 (R)] characteristic impedance 75
± 5O
• Additionally shielded with special fiberglass and 0.12 mm
a (Alpha) conductor braid
• Insulated with air-foamed HDPE reducing capacitance and
damping vibration
• Results in greater resolution, clarity, powerful dynamics,
and an ultra-quiet soundstage in which music develops more fully
without artificial upper-frequency “presence region”
glare.
• GC-303 allows a deeper, tighter bass to form a solid foundation
for the rest of the frequency range, better defining the original
recording’s venue. Natural, unforced detail reveals nuance
and energy for an engaging musical experience.
a (Alpha) Conductor Is Composed Of Fine PCOCC Wire Strands Treated
With Furutech’s a (Alpha) Cryogenic and Demagnetizing Process
Here’s What The Critics Say
“The Furutech cable sound is easily described as one that
completely avoids those peculiar striations that result from highlighting,
the providence of certain silver cables that emphasize edge definition
for nearly surreal image lock. Such sharp edging then becomes synonymous
with etching. It gives a short-lived appearance of exceptional detail
- short-lived since such sound is not only unrealistic but fatiguing.
“The
Furutech cables patently don't cause this. However, they are exceptionally
detailed. I can't help but think that the hexagonal barrel innards
[Formula GC-303 Modules] are at least somewhat responsible for this
wealth of clearly intelligible inner detail. Rather than throwing
detail at you, they throw out inter-note noise. While the end result
might seem the same -- more detail -- the way it communicates is
very different. Put plainly, the Furutechs never fatigue even at
elevated levels yet they do remain ultra resolved.”
-- Srajan Ebaen, 6moons.com
Specifications: Construction and Materials
• 37-strand a (Alpha)-OCC Conductor·0.16mm, 1.15mm
diameter
• Insulation-1:HDPE 1.75mm diameter
• Insulation-2: Air-foamed PE, 5.5mm diameter
• Shield-1: 0.12mm braided a (Alpha) Conductor braid density:
80% UP x 6.3mm diameter
• Sheath: Two layers flexible PVC (Aquamarine) 8mm diameter
• Shield-2: Special fiberglass and copper wire stranded braid
• Jacket: Nylon yarn braid approx. 10.5mm
• Shield-3: Special fiberglass and copper wire stranded braid
• Connectors: RCA [FP-106 (R)] or BNC [FP-3-117 (R)]
Electrical
Properties of Cable Test Method
* Max. Conductor Resistance 25 O/km JISC3005 6 20?
* Min. Insulation Resistance 1000 MO?km JISC3005 9.1 20?
* Dielectric Strength AC. 1000 V/1 min JISC3005 8
* Electrostatic Capacitance Approx 56 PF/m at 1 KHz
* Characteristic Impedance 75 ± 5 O at 10 MHz
1.2m
XLR 120 ohm only
£525.00
Digi
Reference III-N1 (XLR) / 1.2m
High End performance Digital Cable for Audio Equipment
All metal parts are treated with the
*FURUTECH a(Alpha) Process (Super Cryogenic & Demagnetizing
Treatment)
(Type:
Hyper-Balanced Interconnects)
Features:
• Double-shielded a (Alpha)-OCC Conductors eliminate radiated
noise
• Formula GC-303 Antimagnetic EMI-Absorbent Modules surround
each cable
• High performance beautifully engineered XLR connectors [FP-601M
(R)] and [FP-602F (R)] transfer signal without reflections for extremely
low jitter performance
• Pins high-contact luxuriously-finished nonmagnetic rhodium-plated
phosphor bronze for stable Furutech Pure Transmission signal
• Additionally shielded with special fiberglass and 0.12 mm
a (Alpha) conductor braid
• Insulated with air-foamed HDPE reducing capacitance and
damping vibration
• Results in greater resolution, clarity, powerful dynamics,
and an ultra-quiet soundstage in which music develops more fully
without artificial upper-frequency “presence region”
glare.
• GC-303 allows a deeper, tighter bass to form a solid foundation
for the rest of the frequency range, better defining the original
recording’s venue. Natural, unforced detail reveals nuance
and energy for an engaging musical experience.
a
(Alpha) Conductor Is Composed Of Fine PCOCC Wire Strands Treated
With Furutech’s a (Alpha) Cryogenic and Demagnetizing Process
Specifications: Construction and Materials
• 30-strand a (Alpha)-OCC Conductor · 0.18mm , 1.14mm
diameter
• Insulation: 30% air-foamed HDPE (Red/White) 2.60mm diameter
• Cable Lay: Two twisted cores with cotton yarn
• Cable Wrap: Non-woven fabric wrap approx. 5.8mm diameter
• Shield-1: 0.12mm braided a (Alpha) Conductor braid density:
80% UP x 6.3mm diameter
• Sheath: Two layers flexible PVC (Dark Brown) 8.0mm diameter
• Shield-2: Special fiberglass and copper wire stranded braid
• Jacket: Nylon yarn braid approx. 10.5mm diameter.
• Shield-3: Special EMI and noise-absorbent Formula GC-303
module
• Connectors: Male [FP-601 M (R)] and female [FP-602 F (R)]
Electrical Properties of Cable Test Method
* Max. Conductor Resistance 26.4 O/km JISC3005 6 20?
* Min. Insulation Resistance 1000 MO-km JISC3005 9.1 20?
* Dielectric Strength AC. 500 V/1 min. JISC3005 8
* Electrostatic Capacitance Approx 42 PF/m at 1 KHz
* Characteristic Impedance Approx 120 O at 100 KHz
|
