Bel
Canto e.100 M300 300 watt Mono Audio Power Amplifier
£999.00
Free P&P in UK
Call Dave on 01775 761880
user
guides
The audio amplifier is the engine of the audio system. It must provide
the power to drive the loudspeaker motor. The amplifier has huge
power gain: from micro-watts of input power to 100’s of watts
of output power the audio amplifier must do its job with ease and
competence.
Key
issues that must be addressed in a high performance audio amplifier
are:
Power
supply design defines the performance limit of the amplifier,
fully regulated power supplies provide the standard for fidelity.
True balanced operation improves the signal fidelity under load.
Balanced input insures that the large output/input power ratio
does not corrupt the input signal fidelity.
Low output stage impedance, especially at low frequencies, insures
maximum control of the loudspeaker driver.
Comprehensive protection circuit that is outside the signal path
is critical to protecting both the amplifier and loudspeaker.
A short, simple, signal path with a minimum of output devices
leads to a better audio performance.
All of the Bel Canto e.One amplifiers are designed to optimize
performance of all of these criteria. The M300 provides ground
breaking performance in a compact, true mono chassis design with
300 watts of power. The M300 amplifier channel has its own fully
regulated switching power supply, true balanced operation, 4 ohm
drive capability and 111dB of dynamic range.
M300
amplifiers in your system will sound like you are connected directly
to the music source, the loudspeaker and amplifier effectively
disappear in the large and compelling sonic picture. Fidelity
and signal clarity is unmatched from the lowest audio frequencies
through to the sweetest high frequencies. The utter mid-range
clarity especially allows the music to communicate as never before.
Discover
what this remarkable amplifier technology can do for your audio
system.
Specifications:
Power Output: . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .300W into
4 ohms, 150W into 8 ohms
Minimum Load: . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .4 ohms
Frequency Response: . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+/-0.5dB
20Hz-20KHz, all loads
THD+N: . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . .0.01%, 1W, 1KHz, 4 ohms
IMD (CCIF): . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. .0.002%, 1W, 14:15KHz, 4 ohms
Output noise: . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.90uVRMS A-weighted 10Hz-20KHz
Voltage gain: . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27dB
(single ended or balanced input)
Damping factor: . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .>1000
Output Impedance at 100Hz . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . .<8 milliohms
Dynamic Range: . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .111dB
Input Voltage for Max Output . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .1.5Vrms
Input connections: . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Single-ended
RCA or balanced XLR
RCA input impedance: . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .10Kohms
Balanced input impedance: . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .20Kohms
Output connections: . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. .WBT 5-way safety binding posts
Standby Power: . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .5W
Size: . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .8.5”x3”x12”,
216mmx76x305mm (WxHxD)
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .9lbs, 4Kg
Features and specifications are subject to improvements and changes
without prior notice.
