Raidho
C3.0 Speaker System
for the music lover in all of us
Have you ever been to a Nordost
cable demonstration ? If so most likely you have seen the C1.0
and C3.0 used by Lars Kristensen to demonstrate their excellent
cable products.
They are internally wired with Nordost
Valhalla.
The
questions he is always asked and that is "What make are the
Speakers and where can you get them"
Well now they are available in the UK from High End Cable and
to help you upgrade to a C3, Dave will offer you excellent trade
in deals with these speakers. They are available in two standard
finishes.
Raidho
C3.0 - £19,995.00 per
pair
3 Way Monitor Loudspeaker System
Standard
Premium Finishes: Walnut Burl Veneer or Black Piano
Remember
up to 40% off is possible if you
trade in your old speakers
We will deliver and set up the speakers
in your home anywhere in the UK and
take away your old speakers if they form part of the deal.
So
trade up to a C3.0 today
For
a demonstration in Spalding call 01775 761880
High
End Cable used the C3.0 at the Bristol Show 2010 and was used
by Nordost at the Munich 2009 Hi-fi show
The
Raidho Loudspeakers employ the very finest components, including
Ceramic drivers which are hand built in house. The Raidho ribbon
tweeter is unique and was the very starting point of the company.
The new Raidho speakers utilize the very finest filters and crossover
components in a topology unique to Raidho.
How many evolutionary steps does it take to make a revolution?
Loudspeaker technology has moved very little in the past 50 years,
with small improvement in real terms, taking a long time to realize.
But now a systematic reappraisal of fundamental principals has
changed the rules. Designer Michael Boerresen has created a new
standard when it comes to delivering the life and drama captured
in a recording.
Evolutionary ? Yes
Revolutionary ? Absolutely
Product Specifications:
Size: 200mm x 1325mm x 520mm" (WxHxD)
Base footprint 330mm widest x 520mm deep
Weight: 70.5 Kg / 155 lbs.
Freq. response: 30Hz - 50KHz
Impedance: 6 ohm
Sensitivity: 89dB 2.83 V/m
Crossover: 150Hz and 3KHz - 4th & 2nd order
Amplification: > 50 W
Enclosure: Vented design
Ported: Rear panel
Drive
units:
(1) Sealed ribbon tweeter
(1) 100mm / 3.94" ceramic mid driver
(3) 115mm / 4.53" ceramic base driver
Raidho
Ceramix Drivers
Raidho
Acoustics has set path to develop the ultimate driver for loudspeakers.
Looking at the driver market today one can see that not much has
changed over the last decade. To Raidho there was little doubt
that the ridged piston cone approach was the only right path to
take in order to make the best possible Raidho dynamic Driver.
No
Driver is better than the magnet motor, yet magnet systems have
hardly changed in the last 50 years or so. To Raidho eodymium
magnets has completely changed the possibilities of making a more
compact and acoustically ventilated (transparent) magnet system.
The Raidho magnet system consists of two rows on neodymium magnets
placed in a push-pull configuration. Apart from creating a very
controllable flux in the magnet gab. The configuration creates
a very open structure, where the rear side of the membrane is
subjected to very little mirror effect from the faceplate of the
magnet structure. One must realize that sound is transmitted from
both sides of the membrane and that a solid thick face plate acts
like a mirror bouncing sound right back at the membrane again.
Measurements on soft membranes like paper and PP indicates that
this mirror signal is only damped by app 8-10 dB compared to the
original signal, by the ceramic membrane the damping is much higher
and appears more in the nature of compression as partial membrane
movements is not possible on a piston type driver. The patented
Raidho magnet system allows air to move more freely and generates
far less compression than any other magnet system on the
market. The sound improvement going from a traditionally built
magnet system to the Raidho magnet system is huge.
Raidho
Ribbon Tweeter FTT75
The
Raidho Ribbon tweeter FTT75-30-8 is a unique sealed ribbon tweeter.
The tweeter employs an array of neodymium magnets to create an
extremely powerful force field where an ultra thin membrane is
suspended. The membrane weighs less than 0.02 g. Due to low mass
the tweeter stores no energy and has no resonances. The performance
is extraordinaire and the tweeter leaves absolutely no fingerprint
on the speaker system.
review
more pictures
C3.0 right - On demonstration. Call 01775 761880
This
video describes the speaker construction and concept. Eben is
part of Raidho organisation.
