Also available is the aR12 adeptResponce accepts 12 Schuko or
USA plugs @ £4,600.00
Please
note that Teflon Cap versions are not available for 220 to 240v
versions, only USA voltage
Realise
the Full Potential of Power
With Power Factor Correction, RF/Noise Filtering
and Transient Suppression
The
Adept Response will elevate the performance of your audio/video
system to new heights like no other power conditioner. In addition
to superior power protection, the Adept Response delivers the
ultimate audio/video experience.
The
Adept Response High Resolution Power Conditioner is a cutting
edge design providing the best power conditioning possible without
limiting dynamics. Since power must respond quickly and completely
to the demands of program material we believe it is imperative
that power conditioning components present a low impedance power
path while providing wide bandwidth noise reduction. Conventional
power conditioners simply cannot approach the bandwidth/impedance
characteristics of the Adept Response while still offering effective
noise filtration and high voltage surge protection. Exclusive
Audience technology achieves far greater performance for all audio
and video components.
latest
review Feb 2011
Hi-Fi Plus Power Product of the year 2010
"makes
you play more music at a single sitting"
"the level of improvement in most cases was good enough to
make you draw breath"
----------------------
"No product is perfect, but the aR8 gets damn close. It’s
strange; if a change this large is laid at the door of a CD player,
preamp or power amp, few quibble. Even saying changing the interconnect
cables produces this big a difference might be accepted with scant
question, but to attribute these sort of improvements to a power
product is always viewed quizzically. The fact remains that the
Audience adeptResponse aR8 makes a big, important difference to
the sound, every bit in line with three grand upgrades to electronics
further up the food chain. So, set aside your preconceptions and
prejudices and listen."
from
Alan Sircom's review of the aR8 in Hifi
Plus issue 69
Full Specifications
Specifications
The
incoming line voltage monitor is self powered from the power
line voltage and requires several seconds to stabilise when
power is applied. It is also a useful power indicator.
Each
outlet is individually filtered with a double filtering action
between any two outlets giving superior isolation between powered
components.
The
filtering arrangement is such that outlets which are closer to
the power entry point utilise lower frequenct filtering and are
intended for power amplifiers.
The
filtering of the middle outlets is targeted toward the middle
is intended for use with components like preamplifiers, equalisers,
actice crossovers and tape decks.
The
outlets farthest from the power entry are filtered for digital
components such as CD/DVD players, A/D converters, media servers
etc..
The
on/off switch is is also a highe quality magnetic curcuit breaker
with very low DC resistance.The adeptResponse provides state of
the art power delivery capabilities due to its extremely low DC
and line frequency resistance.
Over
protection is is provided by a non-waring devise that can survive
20,000 amp discharges. It is not a wearing, sacrificial device
as are typically used MOV's.
This
device is across the line and will not dump excessive current
into a safety ground. 15
amp capacity 250v.
If you do not wish to buy your Audience product through High End
Cable just ask your local dealer
to contact us and we will be happy to supply them.
Click on image for the adeptResponse aR4
issue
69 review
aR8
Teflon
