Conductor 'se'

Conductor 'se'



adeptResponse Conditioners



Conductor Install Cable

Au24SE, MP & LP
powerCord SE


AU24SE USB Standard

Auric Illuminator

The 1+1 V2

The ONE V2

Please call Dave Jackson on 01775 761880
or Contact


aR2 adeptResponse Power Conditioner

aR2 TSSO UK Teflon
£5,475.00 includes 1.8m Power 'se' powercord
£7,125.00 includes 1.8m Au24se powercord with tuning fuse

aR2-O UK Standard
£2,745.00 includes 1.8m Power 'se' powercord
£4,395.00 includes 1.8m Au24se powercord with tuning fuse

Best price, trade in just call
01775 761880

Realize the Full Potential of Power

With Power Factor Correction, RF/Noise Filtering and Transient Suppression

The Adept Response will elevate the performance of your audio/video system to new heights like no other power conditioner. In addition to superior power protection, the Adept Response delivers the ultimate audio/video experience.

The Adept Response High Resolution Power Conditioner is a cutting edge design providing the best power conditioning possible without limiting dynamics. Since power must respond quickly and completely to the demands of program material we believe it is imperative that power conditioning components present a low impedance power path while providing wide bandwidth noise reduction. Conventional power conditioners simply cannot approach the bandwidth/impedance characteristics of the Adept Response while still offering effective noise filtration and high voltage surge protection. Exclusive Audience technology achieves far greater performance for all audio and video components.

Also available is the aR6 adeptResponce with 6 Schuko or USA plugs
Please note that Teflon Cap versions are not available for 220 to 240v versions, only USA voltages.


Each outlet is individually filtered with a double filtering action between any two outlets giving superior isolation between powered components.

The filtering arrangement is such that outlets which are closer to the power entry point utilise lower frequent filtering and are intended for power amplifiers.

The filtering of the middle outlets is targeted toward the middle is intended for use with components like preamplifiers, equalisers, active crossovers and tape decks.

The outlets farthest from the power entry are filtered for digital components such as CD/DVD players, A/D converters, media servers etc..

The on/off switch is is also a high quality magnetic circuit breaker with very low DC resistance.The adeptResponse provides state of the art power delivery capabilities due to its extremely low DC and line frequency resistance.

Over protection is is provided by a non-wearing devise that can survive 20,000 amp discharges. It is not a wearing, sacrificial device as are typically used MOV's.

This device is across the line and will not dump excessive current into a safety ground. 15 amp capacity 250v.


If you do not wish to buy your Audience product through High End Cable just ask your local dealer to contact us and we will be happy to supply them.


Hit Counter
Free Hit Counter
High End Cable